 |
TRJC100-20A
TR
Product Overview
Current Sensors are electronic devices used to measure the flow of electric current in a circuit. They detect AC or DC current and convert it into a proportional electrical signal for monitoring and control purposes. Common technologies include Hall effect, shunt resistor, and current transformer types. Current sensors are essential in power management, industrial automation, renewable energy systems, motor control, and smart grids. They help improve energy efficiency, ensure system protection, and enable precise current measurement. With high accuracy, fast response, and compact design, current sensors play a vital role in modern electrical and electronic applications.
Product Features
* Multichannel magnetic compensation feedback.
* Tiny misaligned currents.
* Superior linearity.
* High isolation withstand.
* Small error between input & output.
* Wide Frequency bandwidth.
* Fast response speed.
* High-resolution.
* Low temperature drift.
Product Application
* New energy detection.
* Substitute hall products.
* Power electronic measurement.
* Industrial control and measurement.
* Medical facility.
* Standard for laboratory testing.
* Rail traffic.
* Instruments and apparatus.
Product Parameters
Type | Symbol | Test condition | Min | Rated | Max | Unit | |
Measuring Range | IPM | -- | ±100 | ±120 | A DC | ||
Power Supply | Vc | Full range | ±12 | ±15 | ±15.5 | V DC | |
Current Consumption | Ic | Within the IPM Range | ±20 | ±120 | ±140 | mA | |
Ratio | KN | Input：Output | 1000:1 | -- | |||
Rated Output Current | ISN | Primary rated current | -- | ±100 | -- | mA | |
Measuring Resistance | RM | Refer to Pic.1 | -- | 15 | -- | Ω | |
Precision | Xe | 25±10℃ | -- | -- | 0.05 | % | |
Linearity | εL | -- | -- | -- | 0.02 | % | |
Temperature Drift Coefficient | TCIOUT | -- | -- | -- | 0.1 | ppm/K | |
Zero Offset Current | Io | 25±10℃ | -- | -- | ±10 | uA | |
Zero Offset Current | IoT | Full operating temperature | -- | -- | ±10 | uA | |
Ripple Current | In | DC-10Hz | -- | -- | 2 | uA | |
Dynamic Response Time | tr | 5% up to 90%IPN | -- | -- | 1 | us | |
di/dt Accurately Followed | di/dt | -- | 200 | -- | -- | A/us | |
Frequency Bandwidth(- 3 dB) | F | -- | 0 | -- | 100 | kHz | |
Note: The rated current is rms current when measuring AC
General characteristic
Type | Symbol | Test condition | Min | Rated | Max | Unit |
Operating temperature range | TA | -- | -40 | -- | +85 | ℃ |
Storage temperature range | TS | -- | -55 | -- | +100 | ℃ |
Security feature
Type | Symbol | Test condition | Min | Rated | Rated | Unit | |
Isolated voltage withstand | Between the primary and secondary | Vd | 50Hz,1min | -- | 5 | -- | kV |
Transient isolation withstand voltage | Between the primary and secondary | Vw | 50us | -- | 10 | -- | kV |
This product is molded part, ABS material, tolerance of shape and dimensions in accordance with GB/T14486-2008 MT6;
Lead wire output type, wire: Teflon 1332-20AWG/19-0.185TS/0D1.56, connected to XHB-4Y bayonet terminal.
Product Overview
Current Sensors are electronic devices used to measure the flow of electric current in a circuit. They detect AC or DC current and convert it into a proportional electrical signal for monitoring and control purposes. Common technologies include Hall effect, shunt resistor, and current transformer types. Current sensors are essential in power management, industrial automation, renewable energy systems, motor control, and smart grids. They help improve energy efficiency, ensure system protection, and enable precise current measurement. With high accuracy, fast response, and compact design, current sensors play a vital role in modern electrical and electronic applications.
Product Features
* Multichannel magnetic compensation feedback.
* Tiny misaligned currents.
* Superior linearity.
* High isolation withstand.
* Small error between input & output.
* Wide Frequency bandwidth.
* Fast response speed.
* High-resolution.
* Low temperature drift.
Product Application
* New energy detection.
* Substitute hall products.
* Power electronic measurement.
* Industrial control and measurement.
* Medical facility.
* Standard for laboratory testing.
* Rail traffic.
* Instruments and apparatus.
Product Parameters
Type | Symbol | Test condition | Min | Rated | Max | Unit | |
Measuring Range | IPM | -- | ±100 | ±120 | A DC | ||
Power Supply | Vc | Full range | ±12 | ±15 | ±15.5 | V DC | |
Current Consumption | Ic | Within the IPM Range | ±20 | ±120 | ±140 | mA | |
Ratio | KN | Input：Output | 1000:1 | -- | |||
Rated Output Current | ISN | Primary rated current | -- | ±100 | -- | mA | |
Measuring Resistance | RM | Refer to Pic.1 | -- | 15 | -- | Ω | |
Precision | Xe | 25±10℃ | -- | -- | 0.05 | % | |
Linearity | εL | -- | -- | -- | 0.02 | % | |
Temperature Drift Coefficient | TCIOUT | -- | -- | -- | 0.1 | ppm/K | |
Zero Offset Current | Io | 25±10℃ | -- | -- | ±10 | uA | |
Zero Offset Current | IoT | Full operating temperature | -- | -- | ±10 | uA | |
Ripple Current | In | DC-10Hz | -- | -- | 2 | uA | |
Dynamic Response Time | tr | 5% up to 90%IPN | -- | -- | 1 | us | |
di/dt Accurately Followed | di/dt | -- | 200 | -- | -- | A/us | |
Frequency Bandwidth(- 3 dB) | F | -- | 0 | -- | 100 | kHz | |
Note: The rated current is rms current when measuring AC
General characteristic
Type | Symbol | Test condition | Min | Rated | Max | Unit |
Operating temperature range | TA | -- | -40 | -- | +85 | ℃ |
Storage temperature range | TS | -- | -55 | -- | +100 | ℃ |
Security feature
Type | Symbol | Test condition | Min | Rated | Rated | Unit | |
Isolated voltage withstand | Between the primary and secondary | Vd | 50Hz,1min | -- | 5 | -- | kV |
Transient isolation withstand voltage | Between the primary and secondary | Vw | 50us | -- | 10 | -- | kV |
This product is molded part, ABS material, tolerance of shape and dimensions in accordance with GB/T14486-2008 MT6;
Lead wire output type, wire: Teflon 1332-20AWG/19-0.185TS/0D1.56, connected to XHB-4Y bayonet terminal.
