Good Linearity Hall Effect Current Sensor
Product Description
Product Features
* Highly insulated between the primary and secondary side.
* Small size ,light weight.
* No insertion loss ,low power consumption.
* Wide detection range.
Product Application
Used in electric power, industrial automation, machinery, automotive, home appliances an other industries and fields.
Technical Parameter
| Specification | 6A/0.625V | 15A/0.625V | 25A/0.625V | Unit | |
|---|---|---|---|---|---|
| IPN | Primary Rated Input Current | 6 | 15 | 25 | A |
| IP | Primary Current Measurement Range | 0-18 | 0-45 | 0-75 | A |
| VSN | Secondary rated output voltage | 2.5±0.625 | V | ||
| VC | The Power Supply Voltage | +5V(±5%) | V | ||
| IC | Current Consumption | ＜20 | mA | ||
| Vd | Insulation Voltage | Between primary and secondary circuits:2.5kV/50Hz/1min | |||
| εL | Linearity | ＜0.1 | %FS | ||
| X | Precision | TA=25℃:≤±0.5 | % | ||
| V0 | Offset Voltage | TA=25℃:≤±15 | mV | ||
| VOM | Magnetic Offset Voltage | IP =0 after 3*IPN:≤±10 | mV | ||
| VOT | Offset voltage temperature drift | IP=0 TA=-40-+80℃:≤±0.1 | mV/℃ | ||
| Tr | Response time | ＜500 | nS | ||
| f | Bandwidth(-1dB) | DC-200 | kHz | ||
| TA | Working Temperature | -40-+80 | ℃ | ||
| TS | Storage Temperature | -45-+85 | ℃ | ||
Shape and Installation Dimensions
Circuit link Diagram
Note:
+ :Positive 5V power supply
G :Power ground
M :Secondary signal output
Installation Precautions
The sensor should be wired correctly, otherwise it may damage the internal components of the sensor.
When the sensor is soldered to the circuit board, it needs to be soldered with a low-temperature soldering iron, and the time should not be too long, and secondly, the pins should not be squeezed by a large amount, otherwise the internal connection may be opened.